Smooth the surface with 100-200 grit sandpaper and remove the residues with a damp cloth. Align the edges flush and use 1 1/2″ brad nails to secure them into place tightly.
Cut the ends at 45 degrees for the joints. Make sure the corners are square and add waterproof glue to the joints. Drill pocket holes at both ends of the steps and secure them to the ladder supports with 2 1/2″ screws. Add glue to the joints for a neat result.Drill pocket holes at both ends of the slats and secure them to the legs with 1 1/4″ screws. In addition, attach the 1×4 supports so you can secure the third bed frame to the top bed frame. Attach the 2×2 legs to the end of the bed frame. Use a spirit level to make sure the legs are plumb and to check if the frames are horizontal. Cut a 1 1/4″ wide block of wood and fit it between the slats so you create even gaps between the components. Add glue to the joints and make sure the corners are square.
SImple project plans that kids can do themselves!
DIY doll bed plans from Ana-white.com.
Drill pilot holes through the cleats and insert 2 1/2″ screws to lock them into place. Drill pilot pocket holes at both ends of the 76″ long components and insert 2 1/2″ screws to lock them together tightly. Align the edges flush, making sure the corners are square. Add waterproof glue to the joints, in order to enhance the rigidity of the structure. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. Invest in high quality materials, such as pine, redwood or cedar. Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs withing the total budget.
Learn how to build a doll bunk bed for 18" dolls, such as American Girl Dolls, using common lumber available at Lowe's, Home ...